Type 1 extrusion line for small and medium-sized profiles and tubes up to 65 mm diameter

The extrusion line type 1 can be used for medium-sized profiles (e.g. picture frames, decorative strips) and tubes up to 65 mm diameter.
The picture shows a calibrating table type 201 and a belt type haul-off type 301 with integrated cutting saw type 401.
There is also the possibility of using a caterpillar haul-off type 301 in this extrusion line depending on the kind of production process and the manufactured product.
The basic configuration of the extrusion line includes the following machines:
Calibrating table type 201

with vacuum tank for the pipe production.
Length: | 2500 mm |
Vacuum pumps: | 1 Stück |
Drive power of vacuum pumps: | 2,2 kW |
Calibrating table 201

Length: | 2900 mm |
Vacuum pumps: | 1 Stück |
Drive power of vacuum pumps: | 2,2 kW |
Belt type haul-off type 301

Haul-off power: | 3.000 N |
Haul-off speed: | 0,2 bis 25 m/min |
Caterpillar haul-off type 301
Haul-off power: | 4.500 N |
Haul-off speed: | up to 20 m/min |
Cutting saw type 401

Sawing diameter: | 130 x 50 mm |
Sawing blade: | 300 mm |
Tipping device type 501

Length: | 3000 mm |
Winder type 701
